Cingularity GO ON Charger Short-term Review

August 12, 2017 0 By Editorial Team

Cingularity GO ON Charger – Introduction

Earlier this year when I was on a ride from Pune to Karde Beach with my group The Lycans – Pune, one of my fellow riders had this neatly tucked charger on his bike. Its presence on his motorcycle aroused my curiosity and in conversation with him I came to know about it because I was also looking for something similar to it. I asked him about the Cingularity GO ON Charger and the pros/cons.

The Cingularity GO-ON charger is very small physically which makes it a great fit on the handle bar of any motorcycle. It has a 5 Volts power output which is compatible with most electronic devices and it also charges the device in question very quickly. The Go-On charger is water resistant which is a cherry on the pie. The cost for this charger is very nominal as compared to most other brands in its segment. I have been using this thing from couple of months and wanted to put it go good use before voicing my opinion on this product.

Cingularity GO ON ChargerT – Installation

his charger is very easy to install, as it comes with a long extension wire. There are two different ways of installation, one is attaching the wire directly to the battery OR we can also attach it to the Ignition cable. I chose the Ignition method so that whenever I start my bike that time only then the charger will be in use. I have a Coolpad Note 5 mobile phone which has a 4010mah battery.

With the charging cable provided by the mobile phone manufacturer it takes at about an hour to get 80% of the battery charged which is excellent. Until date have not seen any cons for this little gadget. Indeed it is a value for money product and I would highly recommend this product.

Tech specs ( As per the manufacturer’s Website)

Cingularity GO ON Charger – Technical Details

Brand Cingularity
Product Go On Charger
Item Weight 68 g
Product Dimensions 7 x 3.3 x 2 cm
Item model number G1
Manufacturer Part Number CG-102
Inner Material PCB and Electronics Stainless steel USB connector
Outer Material All weather UV resistant Plastics ABS/ASA/PU
Material Plastic
Colour Black / Red / Orange
Water Resistance Water Resistant
Included Charging device with 2 mtr wire/ fuse assembly / 7.6mm x 200mm cable tie/ pre formed PU anti vibration pad/ Warranty card/ Electrical and Installation instruction printout.
Item Weight 70 Grams
Amperage 3 Amps
Voltage 5 Volts
Wattage 15 Watts

Saureen Shah

Location Courtesy: Café Wheeze

Motocycle: Yamaha FZ16 (1.0)